Best Scroll Saws – Update October 2020
Our team is spending hundreds of hours in selecting best Scroll Saws for you. We only select bestselling Scroll Saws online so that you get best return for your money.
We select 3 type of Scroll Saws so it meets need of all type of consumers.
1) Cheap Scroll Saws.
2) Affordable Scroll Saws.
3) Expensive Scroll Saws.
We strongly advice that you read our top 10 Scroll Saws reviews so you can select the one that suites you best. We also put great effort in finding advantages of Scroll Saws so only best product are recommend on our site.
We always put our 100% in whatever we recommend.
Top 10 Scroll Saws reviews in 2020
WEN 3921 16-inch Two-Direction Variable Speed Scroll Saw
- Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
- Variable speed goes from 400 to 1600 strokes per minute
- Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
- Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
- Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades
Delta Power Tools 40-694 20 In. Variable Speed Scroll Saw
$352.79 in stock
- Electronic variable speed can be adjusted from 400-1,750 SPM for a wide array of cutting applications
- Dual parallel link arm design reduces vibration reducing over and under cutting improving accuracy and quality
- Upper arm lifts and locks in the raised position during blade changes or while adjusting blade position for fret work
- Tool-free blade clamp allows for quick, easy blade changes in seconds. Bevels 0° - 45° left and right. Motor: 1.3 Amp
- On/Off switch, electronic variable speed dial, flexible dust blower and blade-tensioning lever are all conveniently located up front on the arm for easy accessibility
DEWALT Scroll Saw, Variable-Speed, 1.3 Amp, 20-Inch (DW788)
- Double parallel link arm design dramatically reduces vibration and noise for extremely accurate cuts
- Exclusive tool free blade clamps allow blade changes in seconds. Depth of Cut (inches): 2 inch
- On off switch, electronic variable speed, flexible dust blower, and blade tensioning lever all located on front upper arm
- Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation
- Arm lifts so blade can be easily threaded through the material for inside cuts
TACKLIFE Scroll Saw, 500-1700 SPM Variable Speed Scroll Saw with Flexible Shaft Grinder (31 Accessories), Foot Switch, LED, Air pump -TLSS01A
- THE SPECIFICATIONS ➤1.2Amp Pure copper motor, 16 Inches Scroll Saw, Variable speed goes from 500 to 1700 SPM. Variable speed options, large-size worktable, and pure copper motor power are enough to cut various types of wood.
- FOOT SWITCH & GRINDER ➤Besides ordinary switches, TACKLIFE scroll saw also has a footswitch, which can freely control the speed during cutting and sanding work. The scroll saw with a sander is equipped with 31 sanding accessories for the final step of making great artwork. The variable speed of the grinder goes from 2400 to 4500 RPM.
- 45° BEVEL CUTTING ➤Spacious 16-by-10-inch table bevels up to 45 degrees for angled cuts. The cutting depth of the table at 90° is 2.2 inches, and the cutting depth of the table at 45° is 1 inch.
- MULTIFUNCTION ➤Tool-free blade changes, a cast iron base, an air pump, a LED light, a dust port, a footswitch, flexible shaft grinder, onboard storage, and four blades. All these functions are just for you to have a better cutting experience.
- WARM PROMPT ➤For the better user experience, when using the electric grinder function, please fix the scroll saw on the stand before using, to prevent the running saw from causing danger. Please wear working headphones to reduce the working noise.
BUCKTOOL 16-inch Variable Speed Scroll Saw Pin or Pinless Blade with Pedal Switch Cast Iron Work Table
- Variable Speed: 1.2-Amp DC Motor for Quiet, Smooth Performance
- LED Worklight: Vibration-free LED light with no light bounce provides a clear view when cutting
- Pedal Switch Design: With a hands-free convenience pedal switch for easily stop and start the tool with the tap of your foot when you need to drill a new hole, change blade, or if an emergency occurs
- Quick-Change Blade System: Quick-Change Blade System with Quick open side panel and user-friendly blade holder, easy for blade changing, attached with 3 blades 2 with pin and 1 pinless
- Cast Iron Table: Heavy-duty 16-by-9-inch cast iron work table bevels up to 45 degrees to the left for angled cuts. Cutting depth is 2-Inch with a 16-Inch throat depth
WEN 3922 16-inch Variable Speed Scroll Saw with Easy-Access Blade Changes
- Unique side panel flips open for easy-access blade changes
- Variable speed goes from 550 to 1600 strokes per minute
- Spacious 16-by-10-inch table bevels up to 45 degrees for angled cuts
- Cuts wood up to 2 inches thick with a 16-inch throat depth
- Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a dust port, a foot lock clamp, and three 5-inch blades
SKIL 3335-07 16", Scroll Saw With Light,Red
- Integrated dust removal system keeps cutline free of debris
- Articulating LED worklight ensures that the work piece is clearly lit.1.5 inches Dust port keeps work area clear of dust
- Electronic variable speed control helps cut a variety of materials
- Tilting 16" x 10" work table tilts 0-45 degrees for precise cuts
- 16" throat allows for cutting thicker pieces
Shop Fox W1713 16-Inch Variable Speed Scroll Saw
$172.25 in stock
- 1/8HP, 1.2-Amps, 110-Volt, 60Hz motor
- 16-Inch maximum cutting width
- Includes a gooseneck work light, dust blower and dust port
- Plain or pin blades
- No load speed: 550-1700 SPM
Scroll Saw Workbook, 3rd Edition: Learn to Master Your Scroll Saw in 25 Skill-Building Chapters (Fox Chapel Publishing) Ultimate Beginner's Guide with Projects to Hone Your Scrolling Skills
6 used from $12.40
- Fox Chapel Publishing
Scroll Saw With Rotary Tool, 16-inch, 500-1700 SPM Unique Pedal Switch, Variable Speed Scroll Saw, 4 Blades, Double Parallel Link Arms, Cast Aluminium Base, Work lamp
- ➤UNIQUE PEDAL SWITCH & DEDUSTING SYSTEM: With a hands-free pedal switch for easily stop and start the scroll saw with the tap of your foot when your hands are at work. Air pump above and the dust blower can clean the sawdust on saw teeth and workbench for clear sight of cutting line and neat working environment.
- ➤SHAFT GRINDER & VARIABLE SPEED : The unique shaft grinder comes with 31 rich accessories, for example: tools for polishing wood, iron small grinding, small cutting discs, grinding wheel, smaller bits and others. Helping you turn the wood into a meaningful shape. Electronic variable speed can be adjusted from 500-1,700 SPM for a wide array of cutting applications.
- ➤45°BEVEL CUTTING & TOOL-FREE BLADE CHANGE: Spacious 16-by-10-inch table bevels up to 45° for angled cuts. The max cutting depth is inch at 90°and 1-inch at 45°. You can change the blade within 1min without any auxiliary tool. If you want to know more about how to change the blade, please look at the video below.
- ➤ALL FUNCTIONS AND ACCESSORIES PROVIDED: 4* blades (2* pinned blades, 2* pin-less blades), a cast aluminium work table, an air pump, a LED work lamp, a dust port, flexible shaft grinder, on-board storage, double-safety switch, blade protection. Strive for a better experience for you in the cutting process.
- ➤WARM REMINDERS: For better user experience, please fix the scroll saw on the stand before using the function of shaft grinder, so as to avoid a danger. Every TACKLIFE tool has 2-year warranty, if you have any problem, please contact us: [email protected]
We are a group of review enthusiast who are working 24×7 to find great products which benefits the consumers. In case if you have not found right Scroll Saws for you then you can email us and we will come back with additional list of best Scroll Saws available online for you.